tracking pixel
korygan

Hueforge Alucard

by
korygan
Follow
Follow
Remix Model
korygan
korygan
|
Image 1 of 2
Hueforge Alucard 3d model
korygan
korygan
|
Image 1 of 2
Hueforge Alucard 3d model
2D
3D
Makes
Hueforge Alucard 3d model
Hueforge Alucard 3d model

Explore the intricate detailing of the Hueforge from the Hellsing Manga on Thangs.com. This 3D model, brilliantly recreates the enigmatic vampire, Alucard. Designed with meticulous accuracy

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA BambuLab Basic Brown Transmission Distance: 2 PLA PolyLite Red Transmission Distance: 1.5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Orange Transmission Distance: 10

Swap Instructions: Start with Brown At layer #4 (0.4mm) swap to Red At layer #8 (0.72mm) swap to Beige At layer #14 (1.2mm) swap to Yellow At layer #18 (1.52mm) swap to Orange for the rest.


5 Likes2 DownloadsJanuary 24, 2024


5 Likes2 DownloadsJanuary 24, 2024